Our Services
Engineering

Engineering

  • Engineering services include detailed engineering.
  • Procurement services include material and equipment purchasing.
  • Construction services include mechanical, electrical, instrumentation, scaffolding, corrosion prevention, thermal insulation, refractory , passive fireproofing and general civil engineering.
  • Engineering services include detailed engineering.
  • Procurement services include material and equipment purchasing.
  • Construction services include mechanical, electrical, instrumentation, scaffolding, corrosion prevention, thermal insulation, refractory , passive fireproofing and general civil engineering.
Mechanical

Mechanical

  • Tankage construction and rehabilitation
  • Structures fabrication and installation
  • Piping fabrication and installation
  • Pressure vessels fabrication and installation
  • Mechanical equipment installation
  • Static equipment maintenance
  • Rotating equipment maintenance
  • Heat exchanger maintenance
  • Weld Overlay
  • Tankage construction and rehabilitation
  • Structures fabrication and installation
  • Piping fabrication and installation
  • Pressure vessels fabrication and installation
  • Mechanical equipment installation
  • Static equipment maintenance
  • Rotating equipment maintenance
  • Heat exchanger maintenance
  • Weld Overlay
Electrical

Electrical

  • HV power systems network analysis – feasibility studies, fault studies; protection coordination and discrimination studies, harmonic studies, power factor studies; load flow and voltage drop studies.
  • Power system – complete utility or plant distribution systems, outdoor switchyards up to 132kV, indoor metal clad switchgear up to 33kV, motor control centers (415V, 1000V and 3.3kV), electronic motor starters, variable speed drives (HV and MV), lightning protection, earth grid design, step and touch potential calculations.
  • Others – CCTV, PA, ELV, Fire alarm and control system installation, excavation and construction of cable trench, earthing and lightning protection system, lighting system, HV and LV cable installation and termination, structural cabling and electrical heat tracing system.
  • HV power systems network analysis – feasibility studies, fault studies; protection coordination and discrimination studies, harmonic studies, power factor studies; load flow and voltage drop studies.
  • Power system – complete utility or plant distribution systems, outdoor switchyards up to 132kV, indoor metal clad switchgear up to 33kV, motor control centers (415V, 1000V and 3.3kV), electronic motor starters, variable speed drives (HV and MV), lightning protection, earth grid design, step and touch potential calculations.
  • Others – CCTV, PA, ELV, Fire alarm and control system installation, excavation and construction of cable trench, earthing and lightning protection system, lighting system, HV and LV cable installation and termination, structural cabling and electrical heat tracing system.
Instrumentation

Instrumentation

  • Control system – PLC system design (including panel designs), preparation of functional specifications, PLC programming, configuration and commissioning.
  • Supervisory control system (SCADA) configuration, telemetry system design, energy management systems, PLC-PLC and PLC-SCADA communication networks, data integration with ERP databases.
  • Complete system – analogue, digital and "smart" systems, selection and sizing of instruments and component materials to suit the process environment, loop powered and separately powered devices, preparation of P&ID drawings and loop diagrams, configuration, testing and commissioning.
  • Others – Servicing of control valves, instrument cable laying, transmitter and instrument analyser installation, metering skids and gas detection systems installation.
  • Control system – PLC system design (including panel designs), preparation of functional specifications, PLC programming, configuration and commissioning.
  • Supervisory control system (SCADA) configuration, telemetry system design, energy management systems, PLC-PLC and PLC-SCADA communication networks, data integration with ERP databases.
  • Complete system – analogue, digital and "smart" systems, selection and sizing of instruments and component materials to suit the process environment, loop powered and separately powered devices, preparation of P&ID drawings and loop diagrams, configuration, testing and commissioning.
  • Others – Servicing of control valves, instrument cable laying, transmitter and instrument analyser installation, metering skids and gas detection systems installation.
Scaffolding

Scaffolding

Hai Leck is an Approved Scaffold Contractor certified by the Ministry of Manpower. Scaffolds are the primary mode of access in most large structures and are widely used by fellow contractors and plant owners for carrying out work and inspection of new constructions and maintenance works. The two main types of scaffolds that we provide are system scaffolds and tubular scaffolds. We have a sizeable inventory of scaffold materials which has enabled us to take on major construction projects and maintenance contracts in the oil and gas and petrochemical plants.


All our scaffolds are constructed by certified scaffolders under the supervision of our qualified scaffold supervisors and where necessary, certified by our professional engineers to be safe for use in accordance with Singapore Standard, Code of Practice 14: 1996.
Hai Leck is an Approved Scaffold Contractor certified by the Ministry of Manpower. Scaffolds are the primary mode of access in most large structures and are widely used by fellow contractors and plant owners for carrying out work and inspection of new constructions and maintenance works. The two main types of scaffolds that we provide are system scaffolds and tubular scaffolds. We have a sizeable inventory of scaffold materials which has enabled us to take on major construction projects and maintenance contracts in the oil and gas and petrochemical plants.


All our scaffolds are constructed by certified scaffolders under the supervision of our qualified scaffold supervisors and where necessary, certified by our professional engineers to be safe for use in accordance with Singapore Standard, Code of Practice 14: 1996.
Corrosion Prevention

Corrosion Prevention

Hai Leck specializes in corrosion prevention through application of industrial protective coatings. Our corrosion prevention services provide protection for metal structures in the oil and gas and petrochemical plants against oxidisation, erosion and rust which weakens the chemical bond and structural strength of these structures.


Prior to the application of protective coatings, we prepare the surface of the substrates primarily through grit blasting either through automated shot blasting or at site in protective enclosures. The types of protective coatings we offer include various epoxy, zinc silicate, polyurethane, thermally sprayed aluminium and glass fibre lamination.
Hai Leck specializes in corrosion prevention through application of industrial protective coatings. Our corrosion prevention services provide protection for metal structures in the oil and gas and petrochemical plants against oxidisation, erosion and rust which weakens the chemical bond and structural strength of these structures.


Prior to the application of protective coatings, we prepare the surface of the substrates primarily through grit blasting either through automated shot blasting or at site in protective enclosures. The types of protective coatings we offer include various epoxy, zinc silicate, polyurethane, thermally sprayed aluminium and glass fibre lamination.
Thermal Insulation

Thermal Insulation

Thermal insulation refers to methods and processes used mainly for heat transfer. Some of the common insulation materials we apply include calcium silicate, rockwool, pyrogel, cryogel and cellular glass.


In the oil and gas and petrochemical industries, fluids and gases in pipes, vessels and process equipment must be maintained at constant temperatures during the treatment process. Our thermal insulation application is applied to various parts of the oil and gas and petrochemical plants, such as pipes, vessels and process equipment, to reduce the energy needed to maintain the temperature of such fluids and gases, thus saving energy consumption and reducing operating costs.
Thermal insulation refers to methods and processes used mainly for heat transfer. Some of the common insulation materials we apply include calcium silicate, rockwool, pyrogel, cryogel and cellular glass.


In the oil and gas and petrochemical industries, fluids and gases in pipes, vessels and process equipment must be maintained at constant temperatures during the treatment process. Our thermal insulation application is applied to various parts of the oil and gas and petrochemical plants, such as pipes, vessels and process equipment, to reduce the energy needed to maintain the temperature of such fluids and gases, thus saving energy consumption and reducing operating costs.
Refractory

Refractory

Refractories are materials capable of withstanding high temperatures above 800°C and physical wear and corrosion by chemical agents. They are used to line high temperature furnaces, incinerators, reactors and other processing units.


We provide complete refractory packages including design, material procurement, installation, commissioning and maintenance of the refractory linings we supply to our customers.
Refractories are materials capable of withstanding high temperatures above 800°C and physical wear and corrosion by chemical agents. They are used to line high temperature furnaces, incinerators, reactors and other processing units.


We provide complete refractory packages including design, material procurement, installation, commissioning and maintenance of the refractory linings we supply to our customers.
Passive Fireproofing

Passive Fireproofing

In the oil and gas and petrochemical industries, the most common type of fires encountered is hydrocarbon fires which occur when hydrocarbon chemicals and fuels ignite. We provide passive fireproofing systems designed to restrict the effects of hydrocarbon fires on structures and equipment to protect steel structures and equipment in the event of a fire.
In the oil and gas and petrochemical industries, the most common type of fires encountered is hydrocarbon fires which occur when hydrocarbon chemicals and fuels ignite. We provide passive fireproofing systems designed to restrict the effects of hydrocarbon fires on structures and equipment to protect steel structures and equipment in the event of a fire.
General Civil Engineering

General Civil Engineering

We also provide civil engineering services to complement our in-house services. Our civil engineering works capabilities include tank foundation, site preparation, construction and maintenance of temporary facilities, dormitories, warehouses and sheds.


The general civil engineering services include:
  • Site survey
  • Perimeter fencing
  • Vegetation clearing
  • Ground levelling, grading and compaction
  • Drainage
  • Roads
  • Temporary facilities construction and maintenance of:
    • Office buildings
    • Dormitories
    • Canteens
    • Warehouses
    • Toilets
  • Site survey
  • Perimeter fencing
  • Vegetation clearing
  • Ground levelling, grading and compaction
  • Drainage
  • Roads
  • Temporary facilities construction and maintenance of:
    • Office buildings
    • Dormitories
    • Canteens
    • Warehouses
    • Toilets